Westfield XTR2, Руководство по монтажу

Страница: 13 / 159

1.11
BOLT FINDER PAGE
METRIC BOLT FINDER DIAMETER
(Actual Length) (Actual Size)
M5 (5mm Diameter)
M6 (6mm Diameter)
M8 (8mm Diameter)
M10 (10mm Diameter)
M12 (12mm Diameter)
20m
16m
25m
NOTES:
i)
The DIFFERENCE between a BOLT and a SETSCREW is:
- A Bolt is only partially threaded and has a plain upper section whereas
a Setscrew is threaded along its whole length.
ii)
The Length of a BOLT or a SETSCREW is measured from the underside
of the head, refer to Diagrams above.
iii) The Diameter of a BOLT is measured across the plain (non-threaded)
section.
iv) The Diameter of a SETSCREW is measured across the top of the
threads.
30m
35m
40m
45m
50m
55m
60m
60mm
Measure length from below head as shown
Plain Section
(Shank)
Threaded
Section
Di
(Diameter)