Westfield XTR2, Руководство по монтажу

Страница: 83 / 159

13.3
SECTION 13 - REAR DIFFERENTIAL & SPROCKET
Tools Required:-
-
2 x 17mm Spanners / 2 x 5/8” Spanners / 1 x 8mm Allen Key / 1 x 3mm Allen Key
Parts Required:-
-
1 x Differential Unit / 1 x Sprocket / 2 x Differential Unit Adjusters /2 x Bearing Carriers / Loctite
-
2 x 7/16” UNF x 3¼” Long Bolts / 2 x 7/16” UNF Washers & Nyloc Nuts / 2 x M10 x 55mm Long
Bolts / 6 x M10 Washers / 10 x M10 x 30mm Long Setscrews / 12 x M10 Nyloc Nuts / 2 x M10
Socket Cap Screw x 100mm Long / 4 x M10 Lock Nuts
Step 1: Assemble Differential Unit
Slide Bearing Carriers Onto Differential As Shown
Step 2: Install Differential Unit
Fit Differential Into Chassis And Fix Into Place Using The Lower Mounting Points To Begin With
50
View From Rear Of Car
Differential Unit
NOTE
There Are Two Grub Screws In
The End Of Each Bearing.
DO NOT Tighten At This Stage
As The Unit Will Be Adjusted At
A Later Date And Fixed In Place
Using These Grub Screws.
Bearing Carriers Fitted
Chassis Bracket
Carrier Bearing