25
Assembly | Operation
Only use original illuminants of the same type and dimensions (230 V~
15 W E14). A replacement illuminant can be ordered from Westfalia
under the article no. 83 57 42.
Grinding the Depth Gauge
▪
The position of the chain holder assembly (L) for grinding the depth
gauge has to be set to 0°. Adjust the motor assy (A) to the position
90°. Grind the depth gauge with a flat file.
Maintenance and Cleaning
▪
Clean the machine from time to time with a dry paint-brush or a brush
in order to remove grinding residues.
▪
Do not clean the machine with aggressive detergents or aggressive
chemicals.
▪
The machine is maintenance-free and does not require any lubrication.
