Western Shelter Systems AIRFRAME SENTINEL II, Техническое руководство

Страница: 28 / 37

SECTION 4
INSPECTIONS AND OVERHAULS
4.1 FOREWORD
An inspection is an operation consisting in verifying the presence of all the accessories and the correct packaging in the
corresponding bags. It also includes visually checking the integrity of the material.
An overhaul is an operation consisting in verifying the actual functionality of the material and repairing any damage.
The tent and the corresponding accessories must be inspect and/or overhauled by the scheduled terms shown below:
-
INSPECTION PRIOR TO DELIVERY
To be performed on the premises of the
organization to which the tent is supplied.
Whenever the tent leaves storage.
- ROUTINE OVERHAUL
To be performed on the premises of the
organization to which the tent is supplied. After each use and always before returning the tent to
storage.
- GENERAL OVERHAUL AT THE
MANUFACTURER’S PLANT
To be performed by the manufacturer. Whenever required by the organization or when
interventions are required to repair damage which
cannot be repaired by the organization.
4.2 INSPECTION PRIOR TO DELIVERY
A - Visual inspection of bag integrity.
B - Check the bag contents using the checklist. Replace any missing parts using the spare parts list.
C - Deliver the tent if OK.
4.3 ROUTINE OVERHAUL
A - Assemble the tent.
B - Visually inspect the bags and the tent. Specifically:
-
during tent assembly, check the bottom or footprint of the tent (the part in contact with the ground);
- after assembly, check the internal part of the bottom or footprint of the tent and then check the cover liner and the front
panels.
C - Visually inspect the metallic parts, hinges, snap buttons, etc. to locate any rusty or deformed parts.