User Guide
4. Part Replacement
4.9 Chassis Replacement
Required Tools
Required Parts
# of People Required Time Required
•
Cable Ties (for
configurations
with greater than
10 total cables)
•
Tape Measure
•
Level
•
Optional (if using
CMA Tray):
M3 x
8mm T10 Torx screws
Step 1 :
Place the CMA(s) into service position.
a.
Unlatch the CMA(s) from the rail at the elbow connector by pressing the blue release
button.
Figure 132:
Unlatching a CMA Connector
b.
Swing the CMA(s) away from the enclosure.
c.
The arm(s) should be extended away from the enclosure as shown in the following
example.
Figure 133:
CMA(s) in service position (Cables not shown)
Step 2 :
Disconnect the Enclosure from power.
123
