User Guide
4. Part Replacement
4.7 CMA Replacement
c.
Team-lift the enclosure until the inner rails (which are attached to the chassis) align with
the extended mid-rails (which are attached to the rack), and guide the inner rails on the
chassis to mate with the rack rails.
Figure 78:
Installing the Chassis
d.
Once the rails are mated properly, slide the enclosure into the rack until it is stopped by
the safety catch on the rails. Push the release lever on the safety latch (located on the side
of each of the rails), and push the enclosure the rest of the way into the rack.
Figure 79:
Safety Latch Release
e.
As the chassis is slid into the rack, position one installer at the rear of the rack to ensure
that the pegs on the sides of the cover will slide correctly into the rear cover alignment
brackets on both sides of the rack. If the chassis does not install smoothly or snags, check
that the rear cover alignment brackets are not interfering with the chassis sidewalls, and
try again.
86