User Guide
6. Management
6.7 Firmware Upgrade
#
# For a complete list of the default configuration values, run either# multipath -t
# or
# multipathd show config
#
# For a list of configuration options with descriptions, see the multipath.conf
# man page
## Here is an example of how to configure some standard options.
##
defaults {
# udev_dir /dev
polling_interval 10
path_selector "round-robin 0"
path_grouping_policy multibus
# uid_attribute ID_SERIAL
# prio alua
path_checker tur
rr_min_io 100
max_fds 8192
rr_weight priorities
failback immediate
no_path_retry 10
user_friendly_names yes
}
6.7.5
Enabling MPIO for Windows
Note:
MPIO for Windows should be installed from the Windows server prior to this
procedure.
Step 1 :
From the host server, identify the product string for the drives that will be multipathed.
a.
Issue the following command:
sg_scan -s
b.
Locate the information for the drives that will be multipathed.
Step 2 :
Add the product device strings to the MPIO Properties.
a.
Launch the
MPIO Properties
from the host server.
64