User Guide
3. Safety
3.7 Safety and Service
CAUTION
######To avoid electrical shock or fire, check the power cord(s) that will be used with the product as
follows:
•
The power cord must have an electrical rating that is greater than that of the electrical current rating
marked on the product.
•
Do not attempt to modify or use the AC power cord(s) if they are not the exact type required to fit into
the grounded electrical outlets.
•
The power supply cord(s) must be plugged into socket-outlet(s) that is / are provided with a suitable
earth ground.
•
The power supply cord(s) is / are the main disconnect device to AC power. The socket outlet(s) must
be near the equipment and readily accessible for disconnection.
3.7
Safety and Service
#####All maintenance and service actions appropriate to the end-users are described in the product
documentation. All other servicing should be referred to an Western Digital-authorized service technician.
#
#####To avoid shock hazard, turn off power to the unit by unplugging both power cords before
servicing the unit. Use extreme caution around the chassis because potentially harmful voltages are present.
#####When replacing a hot-plug power supply, unplug the power cord to the power supply being
replaced before removing it from the 2U24 Flash Storage Platform.
#####The power supply in this product contains no user-serviceable parts. Do not open the power
supply. Hazardous voltage, current and energy levels are present inside the power supply. Return to
manufacturer for servicing.
#
#
#####Use caution when accessing part of the product that are labeled as potential shock
hazards, hazardous access to moving parts such as fan blades or caution labels.
10
