52
UM380 03 010
InterChange iQ 2000 and iQ 2000plus
6 Manual Configuration or Upgrade
of Software Protocol Options
This chapter describes:
•
General configuration rules and procedures to facilitate the installation of simple
InterChange iQ 2000 and iQ 2000plus applications.
•
The general procedure for interrogating and changing parameter settings during
initial configuration.
•
Configuration parameters common to all InterChange iQ 2000 conversions.
•
Q.931/DPNSS conversion.
6.1 General Module Configuration Procedure
The procedures for installing and commissioning an InterChange iQ 2000 unit are described
in
Chapter 2
. This section describes the configuration process in greater detail.
6.1.1 The Configuration Menu System
First connect a PC with Vision iQ to the management port, then:
1 Select
Configuration
from Vision iQ
2 Select
IQ2000 - CONFIG
, then
3 Type
ADV
for manual configuration
The main configuration menu is a list of options. Most of the main menu options display a
submenu allowing configuration of one aspect of the module. All submenus allow you to
display the current configuration settings, alter some, and return to the main menu. Some
submenu selections provide another submenu. Others present a series of prompts that
require a response.
When configuring some aspects of the system, you are asked to set ALL the relevant
information and are not allowed to change just the options you require. Complete all value
required columns, even where the default is satisfactory.
Ensure you have the configuration worksheets available for reference.
6.1.2 Menu Help Facilities
In any menu, type:
? <Enter>
to obtain a list of the options available to you. This only
displays your input options, not the currently set values.
6.1.3 Confirming Configuration Changes
The
RSET
and
EXIT
main menu options are common to all conversion configuration menus.
