UM380 03 010
25
Management using Vision iQ
This dialogue allows the user to:
•
Delete a shelf definition.
•
Create a new shelf definition.
•
View properties of existing shelf definitions.
•
Connect to a shelf.
4.7.5 Shelf Properties Group
When this option is first selected, the
Shelf Properties
group contains the properties of the
selected definition. The group is greyed to indicate read only. When
New
is selected from
the
Shelf Definitions
Present group, the properties of the new shelf are entered here.
The functions of the fields in the
Shelf Properties
group are described below:
Field
Action
Management name:
Enter the name allocated to the shelf.
Shelf ID.:
Enter the shelf identification. This id consists of one letter followed
by three alphaneumeric characters, followed by a full stop and up
to two digits; for example "CARD.0". Zero is not recognised as a
leading digit.
Shelf password:
Enter the shelf password. Make a note of the password for future
reference - the default password is "HELLO".
Connection type:
Select Direct, network or Remote connection.
Shelf type:
Select the shelf type from the pull down menu (i.e. iQ2000).
Port:
Select which PC port to use for the connection, if applicable.
Speed:
Select the modem speed. 38400 baud is mandatory, if applicable.
Modem control file:
Select the modem control file you wish to use to make a remote
connection.
Modem number:
Enter the telephone number of the modem.
Router control file:
Select the router control file you wish to use.
Router access point:
Enter an ASCII string to denote the access point.
Router/Target Addr:
Enter an IP address in dotted decimal notation fro the route on
shelf as applicable.
4.7.6 Shelf Definitions Present Group
This box presents a list of existing shelf (or unit) definitions. The first definition in the list is
selected (see Figure 11).
Delete button
Press the
Delete
button to delete the currently selected shelf definition from the
configuration file.
