030-300331 Rev. A
32
October 2002
4-Port Router (Model 2400)
User Guide
7.3 Service
Configuration
To use an application that utilizes the NAT (Network Address Translation) protocol, you will have to configure your
Router’s NAT settings. Select
Configuration Service
from the
Configuration
menu.
Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting
your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on your Router
are open and that the required application traffic can pass through your LAN. For a list of supported NAT services,
go to section 9.8 (NAT Services).
This screen allows you to attach a predefined NAT service to your default profile. Once you have selected a NAT
service, click on
enable
. This will display the
Load New NAT Configuration
screen.
