030-300331 Rev. A
53
October 2002
4-Port Router (Model 2400)
User Guide
If you clicked on
save,
the following pop-up screen will be displayed. Click on
OK
. This will save you
Private
LAN Configuration
settings. If you click
Cancel
, your new settings will not take affect.
NOTE: DHCP Lease Time is displayed in the following format: (dd:hh:mm:ss)* This value must be greater than 10
seconds. The default = 01:00:00:00. Seconds must be between 0 and 59, minutes must be between 0 and 59, and
hours must be between 0 and 23.
*(dd = days, hh = hours, mm = minutes, ss = seconds).
If the settings you have entered in the
Private LAN Configuration
screen are incorrect, the following warnings
messages may be displayed via pop-up screens. If this occurs, check the settings in the
Private LAN Configuration
screen.
Warning Message
Check Private LAN DHCP Settings
Start Address is not part of the Subnet
Check the value in the DHCP Start Address field
End Address is not part of the Subnet
Check the value in the DHCP End Address field
End Address is below the Start Address
Check the value in the DHCP End Address field
Lease time must be greater than 10 seconds
Check the values in the DHCP Lease Time fields
Seconds must be between 0 and 53
Check the
Seconds
value in the DHCP Lease Time field
Minutes must be between 0 and 59
Check the
Minutes
value in the DHCP Lease Time field
Hours must be between 0 and 23
Check the
Hours
value in the DHCP Lease Time field
Public LAN Configuration
The following screen will be displayed if you select
Public LAN
from the
Configuration
menu. The Public LAN
feature, if available from your service provider, allows the Router to use LAN IP addresses that are accessible from
the WAN. Public LAN allows your computer to have global addressability.
NOTE: Both Private LAN and Public LAN cannot be disabled.
