Westeel Wide-Corr Centurion Side Draw Discharge Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 38

background image

30

198201 R17

Figure 12.

Side draw opening using the retrofit sheet as a template

Page 18

Remove center horizontal
bolts, top and bottom

195477

Re-attach

drill 13/32" mounting

using retrofit sheet

template

hrough

sheet

Use retrofit sheet as
a template to cut
discharge opening
and mounting holes

Caulk around
retrofit sheet

IMPORTANT:

For some specially designed bins, a heavier wall sheet may be provided for the discharge

opening. This will be noted in the special manual accompanying the bin. For these cases only, a side draw
reinforcing sheet will not be provided.

SIDE DRAW REINFORCING SHEET

For some Bin models a shorter reinforcing sheet needs to be added behind the opening to reinforce this
area. The views below describes the installation procedure and the chart explains which Bins require the
reinforcing sheet.

- Remove some existing horizontal seam bolts from the wall sheet that receives the sidedraw outlet.
- align and bolt the reinforcing sheet on to the wall sheet.

- Field drill the remaining assembly holes (13/32") using the reinforcing sheet as a template. Install 3/8 X

1.5" bolts and nuts

- Cutout discharge opening using the retro fit sheet as a template.
- Attach discharge assembly to outside and last baffle to inside.

SIDE DRAW REINFORCING SHEET WHERE USED CHART

CEW's

ALL

SHORT SHEET REQUIRED FOR ALL BINS NOT ALREADY HAVING

FULL HEAVIER SHEET

CEN's

WITH DISCHARGE IN

2nd TIER

FROM

BOTTOM

SHORT SHEET REQUIRED FOR BINS UP TO

6023, 7220,7518, 7817

WITH DISCHARGE IN

5th TIER

FROM

BOTTOM

SHORT SHEET REQUIRED FOR BINS UP TO

7223, 7521, 7820

NOTE: The Side Draw reinforcing sheet can be used for all applications where the flanged outlet is

penetrating an 8 gauge wall sheet or less..

7. Caulk around the retrofit sheet

8. Insert 3/8 x 1.5" bolts through the wall sheet and the retrofit sheet

9. Field drill the remaining assembly holes (13/32") using the reinforcing sheet as a template.

10. Install 3/8 X 1.5" bolts and nuts.

11. Cut out the discharge opening using the retro fit sheet as a template.

12. Attach the discharge assembly to the outside and the last baffle to the inside.

Note

The side draw reinforcing sheet can be used for all applications where the flanged outlet is
penetrating an 8–gauge wall sheet or less.

5.6. Side Draw Reinforcing Sheet Installation (60’ — 108’ Bins)

For some bin models a shorter reinforcing sheet needs to be added behind the opening to reinforce this area.
The following illustrations show the installation procedure.

1. Remove the center horizontal bolts, top and bottom.

2. Remove some existing horizontal seam bolts from the wall sheet that receives the side draw outlet.

3. Align and bolt the reinforcing sheet on to the wall sheet.

5. ASSEMBLY

SIDE DRAW DISCHARGE – WIDE-CORR® CENTURION® GRAIN BIN

«
...
28
29
30
31
32
...
»

Содержание Wide-Corr Centurion Side Draw Discharge







































Отзывы:

Нет отзывов

Похожие инструкции для Wide-Corr Centurion Side Draw Discharge

Бренд: GE Страницы: 242

Бренд: GE Страницы: 24

Бренд: Balanced Body Страницы: 3

Бренд: Land Pride Страницы: 36

Skid Steer Rakes SR2672

Бренд: Land Pride Страницы: 2

Бренд: Land Pride Страницы: 2

Disc Harrows DH3510

Бренд: Land Pride Страницы: 2

Бренд: Land Pride Страницы: 4

Бренд: Land Pride Страницы: 4

Straw Crimper CR2572

Бренд: Land Pride Страницы: 16

Бренд: Oakworks Medical Страницы: 28

Бренд: Parkside Страницы: 58

Бренд: Velleman Страницы: 16

Бренд: Velleman Страницы: 11

Бренд: Yamaha Страницы: 139

Бренд: Yamaha Страницы: 19

Бренд: Yamaha Страницы: 32

Бренд: ABB Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды