![background image](http://html1.mh-extra.com/html/west-mountain-radio/rigblaster-duo/rigblaster-duo_owners-manual_959601007.webp)
7
PANEL DESCRIPTION continued
FRONT PANEL
-
“cw” LED
– This red LED blinks indicating when CW keying is actively being sent by keyboard CW software.
This LED may be on, even with the
RIGblaster duo
turned off, if the virtual USB serial port has the DTR line
raised high by computer software controlling the virtual serial port. It will also flash with FSK if you have the
incorrect serial COM number assigned in RTTY software.
-
“fsk” LED
– This red LED flickers when FSK keying is active with appropriate software for FSK keying.
Under certain conditions, this LED may be on without an active FSK program running in the computer if the USB
virtual serial port has the DTR line active. It will also flash on CW if you have the incorrect serial COM number
assigned in CW software.
-
“usb” LED
– a green LED indicating the
RIGblaster duo
is connected to a computer supplying USB power.
-
“power” SWITCH
– Turns power ON and OFF. Up is ON and down is OFF.
-
“power” LED
– a green LED indicating the
RIGblaster duo
is turned on.
NOTE:
References used throughout this document, such as
(R18)
refer to the
RIGblaster duo
Switch, Connector, Knob, Jack or LED as illustrated on these PANEL DESCRIPTION pages.
(Fxx)
would refer to the above front panel diagram and
(Rxx)
would refer to the rear panel diagram that
follows.
Example; “This connection is made to the MIC OUT RADIO B
(R18)
on the
RIGblaster duo
”.
(R18)
refers to Rear Panel illustration number so you can quickly locate this particular Switch,
Connector, Knob, Jack or LED on the corresponding diagram.
Содержание RIGblaster duo
Страница 19: ...19 ...