West Mountain Radio RIGblaster duo, Руководство пользователя

Страница: 23 / 30

23
JUMPER DIAGRAMS: MICROPHONE AND RADIOS
FOR 8 PIN ROUND SCREW ON MICROPHONES AND RADIOS ONLY
Used on the P10 jumper block for microphones, and the P2 and P3 jumper blocks with 8 pin round
connector radios only.
ALINCO, KENWOOD, SGC and ELECRAFT with 8 Pin Screw on Microphone Connectors
Pin #
1 - MIC
2 - PTT
3 - NC
4 - NC
5 - NC
6 - NC
7 - MIC GND
8 - PTT GND (OPTIONAL*)
ICOM with 8 Pin Screw on Microphone Connectors
Pin#
1 - MIC
2 - NC
3 - NC
4 - NC
5 - PTT
6 - PTT GND (OPTIONAL*)
7 - MIC GND
8 - NC
YAESU with 8 Pin Screw on Microphone Connectors
Pin #
1 - NC
2 - NC
3 - NC
4 - NC
5 - PTT GND (OPTIONAL*)
6 - PTT
7 - MIC GND
8 - MIC
*The “PTT GND” connection should always be used on the P10 microphone jumper block but it is
optional on the P2 and P3 Jumper blocks. It is normally used except in special cases. For more info
contact West Mountain Radio support.