West Mountain Radio RIGblaster duo, Руководство пользователя

Страница: 26 / 30

26
RX MUTE JUMPER – P9
The “RX MUTE” jumper is located on P9. By default there is a blue jumper installed which causes the
entire station’s monitored audio to mute whenever you activate PTT on either radio via the mic or rear
panel PTT switch. It does not mute if PTT is activated by computer software, allowing you to monitor
the transmitted tones from the computer. Most radios normally mute the receive audio on transmit but
this
RIGblaster duo
feature also mutes the other radio and/or computer.
To operate cross band, or use the monitor feature of a radio remove the P9 jumper to disable audio
muting on transmit.
PC RX FUNCTION ASSIGN – P5
The “PC RX” function assign gives you two options to feed audio to sound card software from two
radios.
With the default option neither radio’s audio output goes to the computer audio input unless it is selected
with the
RIGblaster
monitor select switches. If you select either radio it goes to left channel of the
sound card input (tip). If you select both radios, both of them are connected and the audio is mixed
together. You can monitor two radios with one program, which could come in handy to chase digital
DX on two bands.
The other option is to have radio A always goes to the right channel and radio B always goes to the left.
With this option you may monitor either or both radios by moving both jumpers from the two left hand
sets of pins to the two right hand sets, as shown.
Default, RX monitor switches Both radios, left and right in
select radio sent to PC left chan. stereo, radio B left, radio A right
RADIO A RX CHANNEL ASSIGN – P6
There are many options and considerations with the configuration of how this feature jumper might be
set. Please read this section carefully.
The
RIGblaster duo
is a stereo audio device, that is all the inputs and outputs are pairs of channels,
normally referred to as left and right. Since most radios, but not all, are mono we have given you the
maximum flexibility, as follows.
1)
Default , single receive radio (mono)
to both left and right (dual mono).