![background image](http://html1.mh-extra.com/html/west-mountain-radio/rigblaster-duo/rigblaster-duo_owners-manual_959601021.webp)
21
- This is a supplied stereo mini plug Patch Cord that routes speaker level audio from Radio
B’s speaker output to the
RIGblaster duo
’s “RADIO B IN”
(R12)
. It provides a path for
audio from the radio to the
RIGblaster
. This normally disables the built in speaker in the radio
allowing you to use the main station speakers and headphones driven by the
RIGblaster
. Note:
for radios with stereo (left and right) dual receive you must change the default setting of the P6
jumpers (see advanced options page 27).
- This is a supplied stereo mini plug Patch Cord that routes line level audio from the
computer’s line output (usually green) to the
RIGblaster duo
’s “PC IN”
(R11)
. It provides a
path for audio from the computer to the
RIGblaster duo
. This is a Hi-Fi stereo connection.
For a laptop computer you would use the headphone output
.
- This is a cable (not supplied with the
RIGblaster duo
) that connects the
RIGblaster duo
to a stereo pair of speakers such as the West Mountain Radio
COMspkrs
. The speakers must
have a stereo mini plug. These speakers may be any make or model of stereo amplified
computer speakers or any un-amplified speakers between 4 and 16 ohms.
“POWER AND USB”
- This supplied computer USB type A to type B cable connects the RIGblaster’s “USB”
socket to one of the computer’s USB sockets. Do not plug in this cable unless you have read the
instructions on doing this and are ready to do the USB software driver installation.
- This supplied DC cord with a Powerpole connector and coaxial connector supplies power to
the
RIGblaster duo
. It plugs into the “INPUT 12VDC”
(R1)
jack. The Powerpole connector
plugs into any well filtered nominal 13.8 Volt DC source capable of supplying at least 1 Amp. If
you do not have a RIGrunner with Powerpoles you may cut off that connector and connect it by
some other method but be certain the polarity is correct (Red +, Black -).
STATION HOOKUP DIAGRAM (optional features & functions, in red)
“RIG: MIC/PTT”
- This yellow RCA jack
(R16)
connects a user supplied external PTT foot switch or other
switch. It is an input connector to control PTT in addition to the PTT switch in the microphone.
“LEDS”
- This cable is supplied with an optional LED transmit ready indicator, for radio A. The
attached LED
(R15)
will light red whenever radio A is selected for transmit whether or not it is
actually transmitting.
-
This cable is supplied with an optional LED transmit ready indicator, for radio B. The
attached LED
(R14)
will light red whenever radio B is selected for transmit whether or not it is
actually transmitting.
Содержание RIGblaster duo
Страница 19: ...19 ...