background image

Table of Contents

Introduction   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
What’s in the Box?   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
About the Delta TDIF PCI Audio Card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Product Features & Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Minimum System Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Delta TDIF PCI Audio Card:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Delta TDIF PCI Breakout Cable:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Hardware Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Delta Driver Software Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Windows ME or 98 Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Windows 95 Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Windows NT/2000 Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Macintosh Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Verifying Windows Driver Installation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Verifying Delta Control Panel Software Installation, PC and Mac  . . . . . . . . . . . . . .12
Delta System Basics   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Delta TDIF’s Inputs/Outputs   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
The Digital Monitor Mixer   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
The Patchbay / Router   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Synchronization   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Using the Delta TDIF with your Music Software Application   . . . . . . . . . . . . . . . . .15
Delta TDIF Control Panel Software   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Monitor Mixer Page   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Patchbay/Router Page   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Hardware Settings Page  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
S/PDIF Page   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
About Page   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Save, Delete, Load Buttons; H/W Installed   . . . . . . . . . . . . . . . . . . . . . . .30
Delta TDIF Recording Tutorials   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Typical Setup #1  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Transferring from Tascam TDIF to Computer   . . . . . . . . . . . . . . . . . . . . .32
Transferring from Computer to Tascam TDIF, monitoring with DAT  . . . .35

Typical Setup #2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Typical Setup #3  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Typical Setup #4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Troubleshooting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Troubleshooting Tips for Frequently Asked Questions   . . . . . . . . . . . . . . . . . . . . . .54
Appendix A - Technical Specs   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Appendix B   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Appendix C   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Limited Lifetime Warranty   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

1

Delta TDIF

™ 

M A N U A L

Version:

DTDIF-051601

Summary of Contents for Delta TDIF



























































Reviews: