
These operating instructions are part of the technical documentation of the UV Controller in compliance with EU
Machine Guidelines.
The operating instructions in hand correspond to the 'EC Directive 98/37/EC of the European Parliament and of
the Council on the approximation of the laws of the member states relating to machinery' (Machinery Directive),
Appendix I, Item 1.7.4.
The operating instructions in hand are aimed at the person in charge of the factory who must pass it on to the
personnel responsible for assembly, application and maintenance of the UV Controller.
The person in charge must make sure that the information contained in the Operating Instructions and in the
accompanying documents is read and understood.
The operating instructions must be kept in a known and easily accessible place and must be consulted for advice
whenever there is the slightest doubt.
The manufacturer does not accept any liability for injuries to persons or animals or for damage to goods, the UV
Controller or the system itself cause by improper use, nonobservance or insufficient observance of the safety
criteria listed in these assembly instructions, or caused by changes to the UV controller or use of non-suitable
replacement parts.
The copyright for these operating instructions is the exclusive property of
PANTEC Engineering AG
LI-9491 Ruggell
or its legal heirs.
The Operating Instructions in hand may be reproduced or passed on to third parties only when written consent
has been obtained. This applies also when only sections of the Operating Instructions are copied or passed on.
The same terms govern the transmission of the Operating Instructions in digital form.
PANTEC Engineering AG
Industriering 21
9491 Ruggell
Liechtenstein
http://www.pantec.com
Phone: +423 377 13 33
Fax: +423 377 13 34