16
Functional Overview
Designation
Function
Key designation
NPN/PNP
Configuring the outputs
P
N
The output is preset to PNP. Pressing the
N key sets the output to push-pull.
Pressing the
N key again sets the output to NPN.
The respective circuit diagram indicates how the output is set:
PNP
Push-pull NPN
NO/NC
Configuring the outputs
NO
NC
Outputs can be set up as normally open or normally closed by pressing the
NO
or the
NC key. The respective circuit diagram is displayed.
ON Delay
Adjusting ON Delay
+
–
ON Delay can be set to a value within
a range of 0 to 10.000 ms by pressing
the + or the – key.
OFF Delay
Adjusting OFF Delay
+
–
OFF Delay is adjusted by pressing the
+ or the – key. OFF Delay is disabled if
a impulse duration has already been
selected. If this is the case, Impulse!
appears at the control panel.
Object
OFF Delay
Output
