Wen 65911, Руководство пользователя, Страница: 15 / 36

SANDPAPER INSTALLATION
WARNING: To avoid injury from accidental startups, always ensure that the tool is switched
OFF and unplugged from the power supply before making adjustments.
REMOVING EXISTING SANDPAPER (FIG. 8 & 9)
1. Disconnect the drum sander from the power supply.
2. Using a hex wrench, remove the socket-head screw and
washer securing the drum cover. Lift up the cover to expose
the sanding drum.
3. Roll the sanding drum until the slot on the right side of
the drum is on top. Reach under the right lip of the drum to
locate the spring clamp (Fig. 8).
4. Push forward the clamp to release the tension on the
sandpaper. Slide out the end of the sandpaper from the slot.
5. Start unwinding the sandpaper from the drum (Fig. 9)
until you come to the clamping device on the left side of the
drum.
6. Push the clamping device on the left of the drum to
release the grip on the sandpaper.
7. Remove the sandpaper.
Fig. 8
Fig. 9
15