Well Straler RC-16B, Руководство пользователя

Страница: 6 / 15

6
2.3. Initial set-up programming of transmitter
Follow the procedure below before first use:

Temperature setting (°C of °F) preset for °F;

Current day of week SU-MO-TU-WE-TH-FR-SA;

Current time of day hours and minutes.
To program settings, first remove the battery cover on the back of the transmitter. If you have not
already installed the 2 AAA batteries, this would be a good time to do so. Note the small push
button at the top of the battery compartment. This button is used to perform the initial transmitter
programming.
2.3.1. Changing temperature scale (°C - °F)
DOWN
FAN
TIME
TIMER
FLAME
BACK
SET
RETURN
PROGRAM
REVIEW
AHEAD
-
+
MODE
UP
1. Press button on back of transmitter ONCE. °C
symbol will begin flashing on the LCD-screen.
2. To change °C to °F, press the UP or DOWN
button on the front of the transmitter.
3. After setting/confirming the preferred
temperature scale, press SET/RETURN .
REMARK : If you choose to keep the set
temperature (°C), push SET/RETURN after step 1.
2.3.2. Setting the current day of the week
DOWN
FAN
TIME
TIMER
FLAME
BACK
SET
RETURN
PROGRAM
REVIEW
AHEAD
-
+
MODE
UP
4. Following step 3 above, the SU symbol will
begin flashing on the LCD-screen.
5. To change to the CURRENT DAY of the week,
press the AHEAD or BACK button.
6. After setting/confirming the current DAY of the
week, press SET/RETURN .
2.3.3. Setting of the current hour and minutes
DOWN
FAN
TIME
TIMER
FLAME
BACK
SET
RETURN
PROGRAM
REVIEW
AHEAD
-
+
MODE
UP
7. Following step 6 above, the HOUR digits will
begin flashing in the TIME frame.
8. To set the current HOUR , press UP or DOWN ,
setting the HOUR for the corresponding
AM/PM-period.
9. After setting the current HOUR , press
SET/RETURN and the MINUTE digits will
begin flashing.
10. To set the MINUTES , press UP/DOWN , setting
the correct MINUTES .
11. After setting HOURS and MINUTES press
SET/RETURN . HI FLAME will start to flash.
12. Press SET/RETURN to confirm your settings.
THE INITIAL SET-UP/PROGRAMMING OF THE TRANSMITTER IS NOW COMPLETE. BE SURE THE SLIDE-ON
BATTERY COVER IS REINSTALLED. THE LCD-SCREEN IS NOW IN ITS NORMAL STATE.