Well Straler RC-16B, Руководство пользователя

Страница: 10 / 15

10
2.5.2. Thermo operation (ON/OFF BASED ON SET TEMP SETTING)
The system can control your appliance thermostatically when operating in THERMO mode.
DOWN
FAN
TIME
TIMER
FLAME
BACK
SET
RETURN
PROGRAM
REVIEW
AHEAD
-
+
MODE
UP
NOTE: To prevent repeated thermo-cycling of the gas appliance,
changes in temperature are only recorded every 2 minutes.
1. Press MODE repeatedly until LCD-screen displays
THERMO .
2. Press UP/DOWN to set the desired room
temperature. The highest SET temperature is
32°C (99°F), the lowest SET temperature is 6°C
(45°F). The transmitter will measure the room
temperature every 2 minutes automatically turning
the appliance ON or OFF thermostatically,
according to the SET temperature.
3. Press FLAME to modify the FLAME HEIGHT (see
chapter Adjusting FLAME Height).
Press FAN (only for appliances equipped with a fan) to
modify the FAN speed (see chapter 2.5.5. Changing
FAN speed).
2.5.3. Automatic (PROGRAM)
Press MODE repeatedly until PROGRAM is displayed on the LCD-screen. Together with PROGRAM the following is
displayed on the LCD-screen:
Current period of the day (morn/day/eve/nite), depending on the program;
ON/OFF to mark if the appliance is turned on or not;
Room temperature ( TEMP ). Desired temperature for this period ( SET );
FLAME/FLAME HI to indicate whether the appliance functions or will function with normal/high flames;
FAN LOW/MED/HI to indicate whether the fan operates or will operate in LOW/MEDIUM or HI speed.
The gas appliance will operate fully automatically depending on the pre-programmed weekly program and changes in
temperature.
2.5.4. Adjusting the FLAME HEIGHT
The flame height can be adjusted only in the
following modes: ON – THERMO – PROGRAM .
Press FLAME on the transmitter to change flame
height from LO to HI . You will note the word HI
and a 2
nd
FLAME icon will appear on the LCD-
screen. Press again to change from HI to LO .
DOWN
-
+
UP
SET
RETURN
FAN
BACK
TIME
TIMER
MODE
FLAME
PROGRAM
REVIEW
AHEAD
The transmitter always remembers the last setting of the flame height, and this for the entire mode of operation
( ON - THERMO and PROGRAM mode). Only when you change mode the setting will return to its standard setting
( LO) .