Well Straler RC-16B, Руководство пользователя

Страница: 5 / 15

5
2. Commands of your appliance
Some advantages of the Well Straler new product generation:

Automatic ignition without steady pilot;

Precise digital temperature control in a range of ± 6 m from the heater;

Wireless RF remote control of all the functions of your heater in a range of ± 6m;

Four different operation modes: (ON/OFF – THERMOSTAT – WEEKLY
PROGRAM – COUNTDOWN TIMER);
 Full automatic pre-programmed weekly program with 4 independent temperature
ranges each day, seven days a week.
IMPORTANT For the device to work correctly, the emitter and receiver must be well tuned to each other (cfr.
LEARN, p.13). If the range is lower than 6 m, the antenna of the receiver (black wire on the side) must be moved. If
the receiver is in safety mode (one beep every 20 seconds), it has to be reset. In that case switch the receiver OFF,
and then again on REMOTE.
2.1. Transmitter
The transmitter operates on 2 AAA-size 1,5V batteries. We recommend the use of ALKALINE BATTERIES for maximum
operation performance. Insert batteries into the battery compartment on the back of the transmitter, positioning the (+) and
(-) ends of the batteries as indicated. Once batteries are inserted, the temperature will display. If this is not the case please
check that batteries are inserted properly (check polarity).
2.2. LCD-screen
1. PROGRAM FOR : Displays when programming days of week and
periods of day. In normal state only current DAY (2) and single
PERIOD (3) are displayed, when in PROGRAM mode.
2. DAY : Current DAY of week
3.
P
E
RIOD :
Current period of DAY
4. MODE : Indicates operation MODE of system

ON (Indicates system is on, manually or thermostatically)

OFF (Indicates system is turned off)

THERMO (Indicates the system will automatically cycle,
depending on programmed SET temperature)

PROGRAM (Indicates the system is operating with
PROGRAMMED settings)
5. START AT : Appears when programming time to turn system on
6.
SET : Indicates desired SET room temperature, when in THERMO
or PROGRAM mode
7. F°/C°
:
Temperature, in Fahrenheit or Celcius
8. TIME/TEMP
:
Displays CURRENT room temp. In same frame, the
current time will display in AM or PM. Press TIME/TIMER to display current time
9. LOW : Battery power is LOW . Replace batteries within 2 weeks
10. TIMER : When displayed, indicates countdown timer in operation
11. OVERRIDE : Displays when SET temperature is overridden
12. FLAME
:
Single or double flame symbol indicates burner is operational in LOW/HI mode
13. CP
:
Displays when CHILD PROOF—LOCK OUT“ is engaged. Pressing TIME/TIMER and FAN buttons together for
more than 10 seconds, engages or disengages CP
14. ( SWING
:
not applicable)
15. FAN
: i
ndicates the FAN is operating in normal speed LOW , MED or HI speed (when fan blade is displayed)
16. TRANSMIT : Lights up whenever a signal is send from the transmitter to the receiver.
3
9
2 1
5
13
8
16
12
11
14
7
4
6
10
15