11
2.5.5. Adjusting FAN speed
The speed of the
FAN
can be adjusted only in the following modes:
ON
-
THERMO
–
PROGRAM
.
DOWN
-
+
UP
SET
RETURN
FAN
BACK
TIME
TIMER
MODE
FLAME
PROGRAM
REVIEW
AHEAD
The
FAN
operates automatically in
LOW
speed
(
FAN LOW
) whenever the fire is on for 5 minutes
and stays on for approximately 15 minutes after the
burner is turned off. Press
FAN
to change the
FAN
speed to
MED
or
HI
.
This symbol is displayed when the burner is on:
If the burner is
OFF
only
FAN
appears.
The transmitter always remembers the last setting of the FAN speed, and this for the entire mode of operation (
ON
-
THERMO
and
PROGRAM
mode). Only when you change mode the setting will return to its standard setting (
FAN LOW).
Remark:
only for appliances equipped with a fan.
2.5.6. Temperature OVERRIDE (operates only in PROGRAM mode)
You can change the current
SET
temperature without changing the programs stored in the transmitter‘s memory. The
OVERRIDE
feature will be automatically cancelled at the start of the next
PROGRAM PERIOD
.
DOWN
-
+
UP
SET
RETURN
FAN
BACK
TIME
TIMER
MODE
FLAME
PROGRAM
REVIEW
AHEAD
1. Press
UP/DOWN
to change the
SET
temperature. Setting will be cancelled
automatically when next program period
begins). The word
OVERRIDE
will appear
over the
SET
frame on the LCD-screen.
2. To cancel temperature
OVERRIDE,
press
SET/RETURN
.
2.5.7. Time of day display
DOWN
-
+
UP
SET
RETURN
FAN
BACK
TIME
TIMER
MODE
FLAME
PROGRAM
REVIEW
AHEAD
1. To check the current
TIME
of day, press
TIME/TIMER
on the transmitter for less then
1 second. The current
TIME
of day will appear
in the
TIME/TEMP
frame replacing the
temperature reading.
2. The temperature will reappear automatically in
15 seconds, or you can press
SET/RETURN
to cancel the display of
TIME
immediately.
Содержание RC-16B
Страница 14: ...14...
