16.1
16.2
16.3
Fig. 24
Fig. 25
36
After cleaning has been completed, keep the
device at ambient temperature in a clean
and dry place or store it in the table stand.
Never expose the device to extreme tem-
peratures, moisture, direct sunlight or
vibrations!
A dry and soft cloth (see
Fig.
25
) is suitable for cleaning
the housing. Never try to
clean the device using an
abrasive cleaner, benzine
or a solvent! Never immerse
the device in water or other
liquids!
and / or when the
“Cleaning”
warning indicator
(see
Chapter 17.0
,
page 37) flashes and, if required, clean it
carefully using a cotton bud (see
Fig. 24
)
that has briefly been dipped in medical
alcohol and then immediately using a clean
and dry cotton bud.
In order to achieve a precise
measurement result, it is very
important to ensure that the
infrared sensor of the device is
clean and free from scratches.
Therefore, check the sensor
prior to each measurement
16.0 Cleaning and care
CLEANING AND CARE
D
USA
19.PJN174-14_GA-USA_HHD-Ohrthermometer_DSO364_28.07.14
Montag, 28. Juli 2014 14:37:40
