Fig. 15
Fig. 16
29
PLEASE NOTE:
Wait until the measurement was
saved and no more circles are shown on the display.
Step 4:
Carefully remove the measuring tip of the
thermometer from the external ear canal and read
the temperature measured on the LCD display
(e.g. as shown in
Fig. 16
). The symbol
( )
indicates that an ear temperature measurement
was carried out. A new measurement can only be
carried out after the backlighting has gone out
(waiting time of approx. 6 seconds).
ture measured is
below 99,5 °F
(
con-
stant green
light), if there is
elevated tempera-
ture
in the range from
to
100.3 °F
(single
acoustic signal and
red flashing
light / approx.
every 2 seconds) or if the body temperature is in
the
fever range
from
100.4 °F
to
109.3 °F
(two
acoustic signals and
red flashing
light at intervals
of one second; in addition to this,
FE
(for fever) is
shown on the display).
PLEASE NOTE:
The corre-
sponding temperature values in
°C
(degree
Celsius) can be found in section
8.2
on page 21).
99,5 °F
Step 3:
Keep the device still and
then press the
( )
“Ear measure-
ment” button (see
Fig. 15
). A single
acoustic signal indicates that the
measurement has been started. Aft-
er approx. 2 seconds, two acoustic
signals confirm that the temperature
measurement has been completed.
The
( )
symbol and the ear tem-
perature measured are shown on the
display (e.g. as shown in
Fig. 16
).
At the same time, the backlighting
lights up and signals if the tempera-
TEMPERATURE MEASUREMENT
USA
19.PJN174-14_GA-USA_HHD-Ohrthermometer_DSO364_28.07.14
Montag, 28. Juli 2014 14:37:39
