27
PLEASE NOTE:
If you simultaneously press the
( )
“Ear measurement” and
( )
“Forehead
measurement” buttons for a short period of time,
the device returns to the
standby mode
and
time
,
date
and
ambient temperature
are shown
alternately. Switching to the standby mode is also
carried out automatically if you do not press any
button within a period of approx. 30 seconds!
PLEASE NOTE:
If you press the
SET
button and
keep it pressed for approx. 2 seconds whilst the
measured data saved are displayed, the respective
saved temperature switches / is converted from
°C
(degree Celsius) to
°F
(degree Fahrenheit) or
vice versa. Switching from
°C
to
°F
is confirmed
by
1
short acoustic signal and switching from
°F
to
°C
by
2
short acoustic signals.
DISPLAY in the “Memory mode”:
When recalling the measured values saved, the
following symbols can be shown on the display:
: Symbol for “Memory mode” / memory recall
:
PM
symbol (“post meridiem” = in the after-
noon if time displayed in the 12-hour mode)
: Ear temperature measurement saved
: Forehead temperature measurement saved
been reached, the display switches back to the
standby mode
after the
MEM
button has been
pressed once again and returns to the most recent
entry only after the
MEM
button has been pressed
once more (e.g.
8
, see
Fig. 7
on page 26) etc.
PLEASE NOTE:
If no measured values have been
saved, the
(-- -°C)
display with the
( )
symbol
is shown on the display.
MEMORY MODE
USA
19.PJN174-14_GA-USA_HHD-Ohrthermometer_DSO364_28.07.14
Montag, 28. Juli 2014 14:37:39
