Fig. 4
Fig. 5
19
PLEASE NOTE:
If the device is switched off, you
can switch it on by pressing any button. Then, the
device switches to the
standby mode
. In this
mode,
time
,
date
and
ambient temperature
are
alternately shown on the display.
PLEASE NOTE:
By pressing any button, the green
backlighting of the device is activated for approx.
5 seconds.
shown in
Fig. 5
initially appears for a short period
of time. Then, the display switches to the standby
mode and alternately shows the basic values
0:00
(time),
l- l
(month and weekday) as well as the
current
ambient temperature
. Now, it is recom-
mended to set first the time and date (see
Chapter 9.2
on page 23 - 25).
The two batteries have already been
inserted in the device, but are pro-
tected by means of an insulating
strip. Before using the device for the
first time, open the cover of the
battery compartment on the rear
side of the device (see also page
34). Remove the insulating strip as
shown in
Fig. 4
and close the cover
of the battery compartment. Now,
the device switches on with 4 short
acoustic signals and, on the LCD
display, the full segment display as
8.1 Commissioning of the device
8.0 Basic functions
BASIC FUNCTIONS
PLEASE NOTE:
In the standby mode and in the
setting mode, the display is in the correct position
USA
19.PJN174-14_GA-USA_HHD-Ohrthermometer_DSO364_28.07.14
Montag, 28. Juli 2014 14:37:39
