22
Press the
MEM
button in order to access the
memory mode
. Then press the
SET
button and
keep it pressed for approx. 2 seconds until the
temperature measurement display has switched
from
°C
(degree Celsius) to
°F
(degree Fahrenheit
/
1
acoustic signal) or vice versa from
°F
(degree
Fahrenheit) to
°C
(degree Celsius /
2
acoustic
signals).
8.5 Setting °Celsius / °Fahrenheit
By default, the device has been set in such a way
that it switches to the
standby mode
(
time
,
date
and
ambient temperature
are shown alternate-
ly) approx. 30 - 60 seconds, depending on the
respective mode, after the last button has been
pressed. If you wish that the device switches off
completely after approx. 1 minute, you can pro-
ceed as follows:
Press the
SET
button in the standby mode and
keep it pressed for approx. 2 seconds until the
24 hr
symbol on the display starts to flash. Then
press the
SET
button six times until the
LCd
sym-
bol appears on the display for a short period of
time and the
ON
symbol flashes immediately
afterwards. If you press the
MEM
button now, the
OFF
symbol starts to flash on the display. After-
wards, press the
SET
button in order to save this
setting. Now, the device returns to the standby
mode and switches off automatically approx. 1
minute after the last button has been pressed. If
you wish to switch the device back to the perma-
nent standby mode, you can set the
LCd
/
OFF
setting to
ON
according to the description above.
8.4 Energy saving mode
BASIC FUNCTIONS
D
USA
19.PJN174-14_GA-USA_HHD-Ohrthermometer_DSO364_28.07.14
Montag, 28. Juli 2014 14:37:39
