Welbilt Convotherm mini black easyTouch 10.10, Руководство по установке

Страница: 98 / 148

Safety hazard: mechanical unit components
When setting up the unit, keep the following hazards in mind and take the actions required in order to
eliminate and/or minimize these hazards:
Risk / hazard Where and in which situa‐
tions will the risk/hazard ex‐
ist?
What to do Safety device
Crush hazard for all
body parts if the unit
falls down
When lifting the unit
■
Keep the unit's center of
gravity in mind
■
Avoid bumping into ob‐
jects
None
Crush hazard posed by
a loss of unit stability if
the unit is set up in a
stacking kit or on an
equipment stand
■
When setting up the unit on
an equipment stand
■
When setting up the unit in
a stacking kit
■
If the top is subjected to a
heavy uneven load
■
Do not, under any cir‐
cumstance, subject the
units to additional loads
(on the open unit door,
for example)
■
Always set up the bottom
unit in the stacking kit first
■
Before placing the units
in a stacking kit with cas‐
ters, lock the casters'
wheels
■
Make sure that the devi‐
ces are properly set up
inside the stacking kit
Brake and
swivel lock
when using a
stacking kit
with casters
Crush hazard for all
body parts if the unit
falls down or topples
over
When setting up the unit on
the surface on which it will be
resting
Observe all the require‐
ments concerning the sup‐
porting surface at all times
while setting up the unit.
Please refer to Installation
Location Requirements on
page 41
None
Cut hazard posed by
sharp edges
Whenever handling sheet
metal parts
■
Exercise caution when
performing these activi‐
ties
■
Wear the required per‐
sonal protective equip‐
ment as indicated in the
relevant safety instruc‐
tions
None
3 For Your Safety
Installation Manual 23