Welbilt Cleveland KGT12TGB, Установка, Эксплуатация, Обслуживание, Запчасти и Сервис

Страница: 9 / 28

8.
DAILY
PRE-STARTUP
INSPECTION
1.
Tilt Handle (A) is tight and knob is in place.
2. Kettle Tilt Lock (B) is functioning correctly.
3. Pressure Gauge (C) is in the green when unit is cold.
4. Green Light (D) comes on when unit is energized.
5. Red Light (E) comes on when unit is tilted.
SIX MONTH SERVICE INSPECTION
1. Perform daily startup inspection.
2. Screws holding top cover are in place and tight.
3. Flue gasket is in place and in good condition.
4. Burner is held firmly in place and in good condition.
5. Fasteners securing base and support leg are in place and tight.
6. Perform pressure relief valve periodic test (see Pressure Relief Valve Periodic Testing Procedure).
7. Adequate exhaust and makeup air is supplied to working area.
YEARLY SERVICE INSPECTION
1. Perform six month service inspection.
2. Perform free air calculation (see FREE AIR CALCULATION).
3. Perform safety inspection using SAFETY INSPECITON CHECKLIST found in the MAINTENANCE PROCEDURES.
Cleveland Range equipment requires little preventative maintenance.
We do however provide the following chart as a guideline for
inspection and maintenance to keep your unit functioning at 100%.
PREVENTATIVE MAINTENANCE
FOR MAINTENANCE AND REPAIRS CONTACT YOUR AUTHORIZED MANITOWOC SERVICE AGENCY
AND HAVE A QUALIFIED SERVICE TECHNICIAN MAINTAIN YOUR EQUIPMENT.
B
E
D
C
A
KYM TO APPROVED - MARCH 25, 2011
WARNING
If for any reason this unit is not
functioning correctly DO NOT
OPERATE. Contact your
authorized service agent.
! !