WEISS ST0055A Скачать руководство пользователя страница 41

Страница: 41 / 47

Torque Rotary Unit ST0055A / ST0075A / ST0140A

Cleaning

Cleaning

14.1 Performing cleaning

DANGER

ELECTRIC SHOCK CAUSED BY LIVE PARTS
Failure to follow these instructions will result in death or serious injury.

■

Disconnect the mains supply voltage before performing the work and ensure that

it cannot be switched on.

■

Verify that no hazards can be caused by electrically conductive objects.

■

Verify that all cables for the power supply are disconnected from power.

WARNING

MISSING PROTECTIVE EQUIPMENT
Failure to follow these instructions can result in death, serious injury, and

equipment damage.

■

Immediately reinstall protective equipment that you may have removed to

perform maintenance work after having completed the maintenance work and

verify the effectiveness of the protective equipment.

WARNING

MOVING PARTS
Failure to follow these instructions can result in death, serious injury, and

equipment damage.

■

Verify that the zone of operation of the moving product/machine parts is

safeguarded.

WARNING

HOT SURFACES

The temperature of the motor and the holding brake can exceed 100 °C during

operation.

Failure to follow these instructions can result in death, serious injury, and

equipment damage.

■

Avoid unprotected contact with hot surfaces.

■

Do not allow flammable or heat-sensitive objects in the vicinity of hot surfaces.

■

Before performing work on the motor or the holding brake, verify that you wait for

a sufficient period of time to allow such parts to cool down to a temperature that

allows for safe contact.

For cleaning of electrical components and additional components, respect the instructions in the

documentations of the manufacturer; refer to the applicable documents.
Use the following cleaning agents for cleaning the product:

Mounting instructions_022019_3.0_en

41 / 47

Содержание ST0055A
















































Результаты поиска

Содержание ST0055A

Отзывы:

Похожие инструкции для ST0055A

Бренды по названию

Популярные бренды

WEISS ST0055A, Инструкция по монтажу

Результаты поиска

Содержание ST0055A

Отзывы:

Похожие инструкции для ST0055A

Бренды по названию

Популярные бренды