Torque Rotary Unit ST0055A / ST0075A / ST0140A
Mounting
Mounting possibility 1
Mounting possibility 2
Product type: ST0075A
1. Fit the rotary plate.
2. Center the parallel pins and then drive in the
first parallel pin [1] by one third of the way.
3. Screw in the screws [2] and tighten them.
4. Fully drive in the second parallel pin [1].
5. Fully drive in the first parallel pin [1].
6. Tighten the screws [2] cross-wise with a
tightening torque suitable for the application.
7. Set the zero point.
Mounting instructions_022019_3.0_en
29 / 47
