manualshive.com logo in svg

Weishaupt WRSol 1.0, Руководство пользователя

Поделиться
Скачать
Weishaupt WRSol 1.0 Скачать руководство пользователя страница 8

8

3

3.3 Commissioning 

3.4 Electrical connection 

Terminal rail left (sensor)

Terminal rail right (outputs / voltage supply)

Procedure:

1. Select hydraulic variation required.

➭

Ch. 4

2. Carry out electrical connection in accordance with 

the hydraulic variation selected.

➭

Ch. 3.4; Ch. 4

3. Program the controller, if necessary, start with 

language selection.

➭

Ch. 6.10

4. Set the hydraulic variation selected under item one in 

the controller.

➭

Ch. 6.3

5. Activate overheat protection (recommendation).

➭

Ch. 6.8

6. Activate other options as required where possible.

➭

Ch. 6.8

7. Set time and timer programs

➭

Ch. 6.3 … Ch. 6.6

8. Select all temperatures and values and check their

plausibility.

➭

Ch. 6.2

9. Test and check all outputs in type of operation 

Manual

(the pump start of the solar pumps is not possible
above collector temperatures of 130°C, not even in
manual operation).

➭

Ch. 6.7

10.Reset controller to type of operation 

Auto

.

➭

Ch. 6.1

11.Complete commissioning log in appendix.

12.Show customer the operation and functions of the 

controller. 

The WRSol 2.0 is constructed in such a way, that the 
function of the controller and the type of setting 
parameters can be set by selecting the relevant hydraulic 
variation.
Only the selection menus and setting parameters required
for the hydraulic variation selected will then be displayed.  

All other parameters are blanked out. 

Connection

➭

Remove terminal rail cover.

➭

Connect
• sensor lines,
• MFA output, 
• pump or change-over valve,
• voltage supply
according to the hydraulic variation installed
(Ch. 4).

➭

Secure all connected cables with the traction reliefs
supplied.

➭

Apply voltage, if fault message appears check sensor 
connection, if necessary adjust hydraulic variation.

➭

Refit terminal rail cover once the relevant cable cut-outs
have been opened, use screws (traction relief) 
supplied. 

Improper installation or repair attempts can 
cause life-threatening conditions through 
electric shock.  The installation must only be 
carried out by an electrician with the relevant 
qualifications.
The unit and accessories must not be opened. 
Repairs must only be carried out by the 
manufacturer.

Voltage surge protection

The sensors connected do not require voltage surge 
protection. 
The flow and return of the solar system must be earthed. 

DANGER

Содержание WRSol 1.0



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды