Weidmuller SpeedMarking-Laser, Руководство пользователя

Страница: 20 / 36

Printing jobs
20 5658600000/00/05.07
4.3 Printing jobs
4.3.1 Stopping a printing job
A printing job can be stopped by the software appli-
cation, printer queue or by pressing the button
Job
Cancel .
If the printer has not started a printing job, try to stop
it first using the software application.
If the printing job is in the printing queue or in the
printing spooler, try to delete the printing job there.
If the printing job is printing, press the button Job
Cancel . The printer finishes the MultiCard strips that
are already in the printer storage and deletes the
rest of the printing job.
If the status LEDs light up one after the other after
the printing job has been cancelled, the computer
sends the printing job nevertheless to the printer.
Delete the printing job from the printer queue or wait
until the printer has finished sending the data.
The printer switches into the ready mode (ready
LED lights up).
A
Figure 16 Job Cancel button
A Job Cancel
Tips for cancelling a job
If you press the button Job Cancel , only
the current printing job in the printer will be
cancelled.
If multiple printing jobs are in the printer
storage, the button
Job Cancel has to be
pressed for each printing job.
4.3.2 Printing with manual feeding
The SpeedMarking-Laser is equipped with a manual
feed. This is done as follows.
1 The MultiCard markers will be fed with the project
marking surface into the entry (see also Figure
17 “Manual feeding”).
2 The marker is inserted until it firmly touches the
stop at the end.
Figure 17 Manual feeding
When a marker has been drawn in, the
next MultiCard can be inserted.