Weidmuller SpeedMarking-Laser, Руководство пользователя

Страница: 12 / 36

Printer installation
12 5658600000/00/05.07
2.6 Connection of mains cable
Figure 12 Connection of mains cable
WARNING
Make sure that the power is not switched
on.
1 Switch off the printer by pressing the On/Off but-
ton on the rear side.
2 Insert the mains cable firmly into the printer.
3 Connect one end of the mains cable to an
earthed multiple socket. Make sure that the
mains connection is sufficiently secured.
You can find more information in chapter 8
"Printer specifications".
4 Switch on the printer.
2.7 Installation of printer driver
Before printing, you should install the
printer software.
Before you can use the printer with its
software applications, you have to install
the printer driver.
Windows printer system
Install one of these printer drivers, if the operating
system on your computer is Windows NT4, Windows
95/98, Windows ME, Win 2000/XP.
The SpeedMarking-Laser is compatible to the follow-
ing printer types:
•
HP III
•
HP LaserJet 6P
•
HP LaserJet 6P/6MP (recommended)
Install from the delivered CD the printer driver HP
LaserJet 6P/6MP-Standard
1 Place the CD into your CD-ROM drive. The CD
starts automatically.
2 In the following menu, choose "printer driver"
→
"SMARK“
→
and your installed operating system.
3 If the CD does not start automatically, choose
from the CD the file “setup.exe”
or
the following path:
(CD-ROM:\ D:\Driver\SMARK\English\[Choose
the corresponding operating system]).