Weidmuller SpeedMarking-Laser, Руководство пользователя

Страница: 11 / 36

Printer installation
5658600000/00/05.07 11
7 The transparent plastic-sealing strip is at the right
side of the toner cartridge.
Pull the strip (30 - 35 cm) completely out of the
toner cartridge and dispose of it.
Avoid any contact with the black toner on
the strip.
If any toner gets on your clothing, wipe it off
by means of a dry cloth. Wash it subse-
quently with cold water.
8 Insert the toner cartridge into the printer. Observe
that the arrow on the toner cartridge is pointing in
the same direction as the arrow on the printer.
Insert the alignment rod for the roller in its desig-
nated holding fixture. Close the upper cover.
Figure 10 Insertion of toner cartridge
Never print without the cover of the
SpeedMarking-Laser. The possible light
exposure of the toner results in strong soil-
ing of the device. The MultiCard strips will
be printed completely black.
2.5 Connection of printer cable
The SpeedMarking-Laser possesses a parallel con-
nection. Use this connection, if
•
a connection should be established to a computer
or laptop.
•
your parallel cable has a standard length (up to
3 m).
A
Figure 11 Connection
A Parallel connection for the printer cable
The printer cable is included in the range of
supply.