Weidmuller 2599670000 Скачать руководство пользователя страница 40

Страница: 40 / 43

9 Web server

| Updating firmware

2599890000/01/03.2020

Manual UR67-PROFINET-V14

Switching to Force mode

The web server is now in Force mode, which can be identi-

fied by the red bar. Forced channels can be identified by a

red border.

Display in Force mode

Force mode is terminated when the connection

between the web server and the module is inter-

rupted.

Forcing channels

▶

Click on a channel to force that channel.

The channel is immediately switched to the new status.

Forcing a channel

Terminating/disabling Force mode

▶

Click on

Disable force mode

in the menu bar.

Force mode will also be terminated when you log out.

Disabling Force mode

The station is put back into the status it was in prior to forced

operations.

9.9

Updating firmware

▶

Click on

General information

▶

Check the installed firmware version.

▶

Download the latest firmware from the Weidmüller

website.

Firmware files have the “bsc” file extension.

The file for

UR67-PN-V14 modules, for example, is named FB-PN-IRT-

FULL-0706224-01_00_00-8.bsc.

–

The old firmware in the module is overwritten

when a firmware update is performed.

–

You cannot access the module via the web

server while the firmware files are being

loaded.

–

Make sure that the following points are com-

plied with when the firmware files are being

loaded:

–

The power supply must not be interrupted

–

The connection to the web server must not

be interrupted

–

No changes may be made to the module

▶

Make sure that you are logged in.

▶

To perform a firmware update, click on

Update firm-

ware

in the menu bar.

Updating firmware

Содержание 2599670000












































Результаты поиска

Содержание 2599670000

Отзывы:

Похожие инструкции для 2599670000

Бренды по названию

Популярные бренды

Weidmuller 2599670000, Руководство пользователя

Результаты поиска

Содержание 2599670000

Отзывы:

Похожие инструкции для 2599670000

Бренды по названию

Популярные бренды