Operating instructions
Single mouse clicks (left mouse button) are all that is needed
to operate the web server. Some areas of the interface are
mouse-sensitive, i.e. they change when the cursor is moved
over them even without clicking the mouse ("mouse-over").
When the cursor changes to this icon, the user is
expected to click the mouse.
When the cursor changes to this icon, you can
click the left mouse button to display additional
information.
Tracking changes
Any changed settings will be indicated by a green frame and
green text.
Changes marked
In this state, you can revert each individual change back to
its original setting; the changes have not yet been accepted
by the module. Changes are only saved when you click on
Apply
. Clicking on
Discard
will undo all changes.
Once you have applied or undone the changes, the markers
will be removed.
Setting the language
▶
To change the language, click on
Language
in the menu
bar and then on the required setting.
Setting the language
Logging in and logging out
Access to the following functions is restricted by means of
password protection:
–
Editing parameters
–
Editing I&M data
–
Restarting the web server
–
Resetting the device to factory settings
–
Operating the module in Force mode
–
Replacing language files
–
Loading firmware updates
Users without a user ID have read-only rights, but no write
access. They cannot use the specified functions. If you are
not logged in and you attempt to carry out one of these func-
tions, you will be asked to enter your username and pass-
word.
▶
Click on
Login
in the menu bar.
▶
Enter the username and password.
▶
Click on
Login
.
Entering the username and password
The following login data applies on delivery.
Username:
admin
Password:
Detmold
9 Web server
| Getting to know and setting up the web server
36
2599890000/01/03.2020
Manual UR67-PROFINET-V14
