6 Commissioning
| Adjustable parameters
25
2599890000/01/03.2020
Manual UR67-PROFINET-V14
6.4 Adjustable parameters
Overview of the adjustable parameters
Channel
Designation
Options
Default
IP address
4 digits between 0 and 255
0.0.0.0
Subnet mask
4 digits between 0 and 255
0.0.0.0
Gateway
4 digits between 0 and 255
0.0.0.0
Diagnostic alarm
enabled / disabled
enabled
Channel diagnostic alarm
enabled / disabled / enable alarm & fault LED / enable only fault LED
enable alarm & fault LED
Low voltage bus-/sensor-supply diagnosis
enabled / disabled / enable alarm & fault LED / enable only fault LED
enable alarm & fault LED
Low voltage actuator-supply diagnosis
enabled / disabled / enable alarm & fault LED / enable only fault LED
enable alarm & fault LED
Actuator voltage breakdown diagnosis
enabled / disabled / enable alarm & fault LED / enable only fault LED
enable alarm & fault LED
Restart output after short-circuit
1)
automatic / confirmation needed
confirmation needed
Lock force mode
Force mode unlocked / Force mode locked
Force mode unlocked
Lock webserver
Webserver unlocked / Webserver locked
Webserver unlocked
Diagnostic alarm POF-transceiver
2)
enabled / disabled
enabled
0 ... 15
3)
8 ... 15
1)
Input delay
no / 0.3 ms / 3 ms / 10 ms / 15 ms / 20 ms
3 ms
0 ... 7
Substitute value
1)
Off / On / Hold last value
Off
0 ... 15
Channel diagnosis
3)
disabled / enabled
disabled
0 ... 7
Channel diagnosis DO
1)
disabled / enabled
disabled
8 ... 15
Channel diagnosis DI
1)
disabled / enabled
disabled
1) only with UR67-PN-V14-CU-8DIDO-12, UR67-PN-V14-POF-8DIDO-12
2) only with UR67-PN-V14-POF-16DI-12, UR67-PN-V14-POF-8DIDO-12
3) only with UR67-PN-V14-CU-16DI-12, UR67-PN-V14-POF-16DI-12
"IP address" parameter
This parameter is used to set the IP address for the module.
0.0.0.0 ... 255.255.255.255 (default: 0.0.0.0)
The IP address of the module is 0.0.0.0 ... 255.255.255.255.
"Subnet mask" parameter
This parameter is used to set the subnet mask for the
module.
0.0.0.0 ... 255.255.255.255 (default: 0.0.0.0)
The module uses the subnet mask 0.0.0.0 ...
255.255.255.255.
"Gateway" parameter
This parameter is used to set the gateway for the module.
0.0.0.0 ... 255.255.255.255 (default: 0.0.0.0)
The module uses the gateway 0.0.0.0 ... 255.255.255.255.
"Diagnostic alarm" parameter
This parameter activates diagnostic alarms.
Enabled (default)
The diagnostic alarms are activated.
Disabled
The diagnostic alarms are deactivated.