Weider Club 8980 W, Руководство пользователя

Страница: 12 / 28

12
16. Wrap the Press Arm Cable (30) under a 3 1/2"
Pulley (24). Attach the Pulley, a Cable Trap (28),
and two Half Guards (26) to the Weight Selector
(11) with an M10 x 48mm Bolt (62) and an M10
Locknut (73) at the indicated hole. Make sure
that the Half Guards are oriented as shown
and are on the outside of the Weight Selector.
Make sure that the Cable Trap is oriented to
hold the Cable in the groove of the Pulley.
16
30
26
28
73
62
26 24
14. Wrap the Press Arm Cable (30) over a 3 1/2"
Pulley (24) and route the Cable through the Top
Cover (15) as shown.
Attach the 3 1/2" Pulley (24) and a Cable Trap
(28) to the Top Frame (4) with an M10 x 45mm
Bolt (65) and an M10 Locknut (73). Make sure
that the Cable Trap is oriented to hold the
Press Arm Cable (30) in the groove of the
Pulley.
14
28
24
30
73
65
15
4
15. Wrap the Press Arm Cable (30) over a 3 1/2"
Pulley (24). Attach the Pulley and a Cable Trap
(28) to the Top Frame (4) with an M10 x 45mm
Bolt (65) and an M10 Locknut (73). Make sure
that the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
15
65
30
4
28
24
73
17. Wrap the Press Arm Cable (30) over a 3 1/2"
Pulley (24). Attach the Pulley and a Cable Trap
(28) to the Top Frame (4) with an M10 x 45mm
Bolt (65) and an M10 Locknut (73). Make sure
that the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
17
65
73
24
4
28
30
11