Weider Club 8980 W, Руководство пользователя

Страница: 8 / 28

8
4. Insert the Weight Selector (11) into a Weight (17).
Make sure that the side of the Weight Selector
with the dimpled holes is facing the indicated
slot in the Weight. Make sure that the indicat-
ed slot in the Weight is oriented as shown.
Center the Roll Pin (54) in the indicated hole in
the Weight Selector. Note: The Roll Pin must be
below the Weight.
5. Orient the two Weight Guides (10) with the indi-
cated holes closer to the bottom (see the inset
drawing).
Insert the two Weight Guides (10) into the holes
in the Base (1). Attach the Weight Guides with
two M8 x 115mm Bolts (76), four M8 Washers
(72), two 38mm Spacers (48), and two M8
Locknuts (74).
Slide the two Weight Bumpers (50) onto the
Weight Guides (10). Next, slide eleven Weights
(17), one at a time, onto the Weight Guides.
Make sure that the indicated slot in each
Weight is oriented as shown. Then, slide the
Weight Selector (11) and Weight (17) onto the
Weight Guides.
4
11
54
17
Slot
5
10
17
Slot
Holes
17
50
74
72
1
48
72
76
11
10
Dimpled Holes