Weider Club 8980 W, Руководство пользователя

Страница: 11 / 28

11
13. Attach a 2 3/4" Pulley (23) to the left Press Arm
(8) with an M10 x 53mm Button Bolt (61), two
M10 Washers (71), two 5mm Spacers (25), two
Guards (27), and an M10 Locknut (73). See the
inset drawing. Orient the Guards and the
Pulley as shown. Make sure that the Press
Arm Cable (30) is in the groove of the Pulley.
12. Attach a V-pulley (22) to a Swivel Arm (16) with
an M10 x 64mm Button Bolt (75), two M10
Washers (71), two 5mm Spacers (25), and an
M10 Locknut (73). Make sure that the Press
Arm Cable (30) is routed under the indicated
welded rods.
12
30
25
25
75
16
71
71
Welded
Rod
Welded
Rod
73
22
13
30
27
27
25
25
8
23
73
71
71
61
27
27
23
11. Attach the Press Arm (8) without the wire to the
Upright (3) with four M10 x 25mm Screws (58).
Remove the M4 x 5mm Screw (69) and the
Swivel Arm (16). Route the Press Arm Cable (30)
through the Swivel Arm and the Press Arm (8) as
shown.
Reattach the Swivel Arm (16) to the Press Arm
(8) with the M4 x 5mm Screw (69).
11
8
3
58
58
69
30
16