17
of
76
TECHNICIANS manual
ENGLISH
3.
TRANSPORT AND HANDLING
3.1
Safety precautions
Handling operations must always and exclusively be performed
by qualified personnel and in compliance with applicable safety
and health regulations.
Before starting transport and/or handling, verify the route,
dimensions needed, safety distances, places suitable for
placement, and appropriate means to the operation.
Handling operations must be carried out by at least 2 people, or
with the help of special lifting accessories.
In view of the substantial weight of the equipment, exercise
caution and care in handling operations.
The manufacturer is not responsible for any injury or damage
caused by attires, lifting equipment and personal equipment not
suitable for the type of intervention that the operator must carry.
The packaging material must not be left within the reach of
children, since it is a potential source of danger.
The following residual risks are present during the
handling of the machine and cannot be eliminated:
Hand crush hazard
3.2
DPI characteristics
During transport of the machine, the following PPE
are required:
Mandatory use of protective gloves
Mandatory use of protective shoes
3.3
Dimensions and weight
MODEL:
2GR
3GR
4GR
Width (W)
800 mm
1040 mm
1280 mm
Depth (D)
580 mm
580 mm
580 mm
Height (H)
590 mm
590 mm
590 mm
Max gross weight
104 kg
126 kg
146 kg
3.4
Handling the packed machine
Upon arrival, the machine must be unloaded and
handled with care, carefully following the instructions
on the packaging, or those contained in this Manual.
If there is an external motor pump (optional), the mo-
tor and the pump are provided in a separate package.
It is very important to verify that the maximum load of the
individual lifting equipment, at least corresponds to the loads to
be lifted, plus the safety margins required by current standards.
3.5
Unpacking the machine
Remove the machine from its packaging only at the
moment of installation to prevent accidental collisions
that can damage it:
•
Open the packag-
ing, taking care
not to damage the
machine;
•
remove and take
out the protec-
tions of the ma-
chine and equip-
ment contained in
the package.
•
take the machine
out;
•
dispose of the
packaging in com-
pliance with waste regulations.
After uninstalling the machine, check that there are no damaged
parts due to transport or missing parts. Otherwise, immediately
(no later than 7 days after dispensing) contact the TRANSPORTER
and MANUFACTURER communicating the machine data and
photographic documentation:
It is advisable to keep the packaging until after the guarantee
has expired.
Wood, nails, staples, cardboard: non-polluting material but to be
recycled properly.
Plastic: polluting material neither to be burned (danger of toxic
fumes), nor dispersed in the environment; to be disposed of
according to current regulations.
