Weco Cruiser 402 T, Инструкция по эксплуатации

Страница: 11 / 50

Cruiser 402 T - Cruiser 502 T
Power Pulse 402 T - Power Pulse 502 T
Cod.006.0001.1680
24/04/2014 v2.0
ENGLISH
11/50
CODE SYMBOL DESCRIPTION
L21 When this LED illuminates the following parameter can be set:
SECOND CURRENT B-LEVEL
L22 When this LED illuminates the following parameter can be set:
BASE CURRENT
L23 When this LED illuminates the following parameter can be set:
PEAK TIME
L23+L24 When this LED illuminates the following parameter can be set:
PULSED CURRENT FREQUENCY
L24 When this LED illuminates the following parameter can be set:
BASE TIME
L25 When this LED illuminates the following parameter can be set:
DOWN SLOPE
L26 When this LED illuminates the following parameter can be set:
FINAL CURRENT
L27 When this LED illuminates the following parameter can be set:
POST-GAS
L28
Illuminates to signal activation of a connected remote control unit, if available.
L29 This LED indicates that the current reference setting is imposed by the remote controller.
L30 Illumination shows that the following function has been activated: 2 stroke procedure.
L31 Illumination shows that the following function has been activated: 4 stroke procedure.
L32
Illumination shows that the following function has been activated: 4 stroke B-level pro high frequency arc strike
(HF).
L33 Illumination shows that the following function has been activated: 2 stroke spot procedure (Q-SPOT).
L34 This LED illuminates to show that the following welding mode is selected:
MMA
L35 This LED illuminates to show that the following welding mode is selected:
DESEAMING MODE
L36 This LED illuminates to show that the following welding mode is selected:
TIG DC CONTINUOUS
L37 This LED illuminates to show that the following welding mode is selected:
PULSED DC TIG
L38
This LED illuminates to show that the following welding mode is selected:
SYNERGIC PULSED DC TIG
When this is on, it means that the synergic mode is active and that the operator can set just the welding current while the
other parameters are automatically regulated by the machine. The synergy is optimised by angle welding.
D1
Data setting: The display shows the acronym of the parameter to be set.
Welding: The display shows the effective amperes value during welding.
HOLD function: The display shows the average current value measured over the entire welding period (excluding the
starting and ending ramps).
D2
Data setting: The display shows the value of the selected parameter.
Welding: The display shows the effective voltage during welding operations.
HOLD function: The display shows the average voltage value measured over the entire welding period (excluding the
starting and ending ramps).
S1
Press the button to select the parameter to be set.
Possible choices:
Q-START - DYNAMIC ARC - MULTI TACK
S2
Press and release: the button selects the first level menu parameters.
Hold down for 3 seconds: the button opens the second level menu. When in the menu press and release the button to
select the parameters.
Keep the button pressed while powering on the power source: the button opens the SETUP menu.
S3
Press and release: the button opens the JOBs upload menu.
Hold down for 3 seconds: the button opens the JOBs save and delete menu.
S4
Press and release: the button enables the device to receive the welding current control signal from a remote controller.
Hold down for 3 seconds: the button activates a connected remote controller, if available, which is then used to
manage all functions of the welding power source from a distance.