WebGate UHN Series, Руководство пользователя

Страница: 65 / 95

65
Edit Program
Menu

Record

Edit Program
‘Edit Program’ is menu for modifying record program. Number of
program is 9 (from A to I) and each program has predefined setting.
Each program can be modified by user. User can set the frame rate of
each channel.
Program
There are 9 programs from A to I. Select program to edit.
Video
Display the video channel’s resolution and fps.
Normal Record
Select recording frame rate (FPS, number of frame per second) that are
applied for normal record.
Event Record
Select recording frame rate for video which event is occurred. When event
occurs, NVR starts recording by the frame rate of Event Record.
FPS
FPS means frames per second. Users can select 1 to 30 (NTSC) or 25 (PAL) fps.
Quality
Note that Quality can not be edited. Please use webpage of IP camera to modify the quality.
Record Capacity Usage and Minimum Recording Time
It indicates record capacity status of NVR along with amount of connected HDD.
It also indicates storable time for all channels, for only the video input channels and for expected storable time based
on amount of storage duing last 24 hours.
Quick Setting
Apply the same setting for all channels at once.
<Notice>
1. Frame rate of Normal Record can be ‘1’ or the same with Event Record. No other frame rate are available.
2. The video quality of IP camera can be set in webpage of IP camera, not in ‘Program’ page.
3. If the recording setting exceeds 100% of the ‘Record Capacity Usage’, ‘Program’ page can not be closed. Please check the ‘Record
Capacity Usage’ window.
4. Frame rate (fps) of Event Record can not be set less than frame rate of Normal Record.
- If frame rate for Normal Record and Event Record is the same, lowering the frame rate for Event Record will lower
the frame rate for Normal Record.
- If frame rate for Normal Record and Event Record is the same, increasing the frame rate for Normal Record will
increase the frame rate for Event Record.