WebGate UHN Series, Руководство пользователя

Страница: 63 / 95

63
Record Setting
NVR can set frame rate (frame per second) of IP camera according to the record setting of NVR, but can not
configure the quality (bit rate, bps). Please use the webpage of IP camera to configure the quality.
Record mode has 3 types as normal/event, schedule/event, and emergency record.

Normal/Event record – Record start up upon bootup according to defined program.

Schedule/Event record – Record start up upon defined schedule’s program and time.

Emergency record – Record at max fps regardless of record mode and program.
Record
Both normal/event, schedule/event record can be achieved by selecting program and frame rate will be defined
by program selection.
Normal/Event Record
Normal Record means video recording when there is no event, and
Event Record means video recording when there is event. Video is
always recorded according to the selected program after booting. 9
programs from A to I are available. For more details on programs,
please refer next session.
<Note>
1. Event record means the recording when event is occurred. Event sources
are motion detection, sensor, text, flame detector, etc. Normal record
means the recording when event is not occurred.
2. ‘Event record’ can set the video frame rate (fps) for event recording. This
setting is applied only for event recording. ‘Normal record’ setting is
independent from ‘Event record’ setting. ‘Normal record’ can set the
video frame rate for normal recording.
3. Event record is more important than normal record, and thus, frame
rate of event record can not be set less than the frame rate of normal
record.
4.
The video quality of IP camera can be set in webpage of IP camera, not
in ‘Program’ page.
Schedule/Event Record
Schedule/Event Record means recording only at a specified schedule
time. User can set the time schedule and set the program for each
time schedule. Program can be selected among 9 from A to I. One
program can be applied on one schedule, at least one schedule per
day and max 50 schedules per week can be defined.
Set Schedule
Set begin/end time to record, day and program, and click “Add”. The
corresponding info will be graphically displayed on day/time table.
• Day: set applicable day
• Time: set applicable time from begin to end to record
• Program: set the record program to be applied to this schedule
• Add: schedule registration
• Delete Selected: Schedule unit which is graphically selected will
Menu

Record

Record Mode