WebGate UHN Series, Руководство пользователя

Страница: 15 / 95

15
Installation
Check settings
This NVR is high quality security device with a high capacity built-in HDD and important curcuits. Before
installation, please read carefully below recommendations as high internal temperature of the product can lead
to damages and shorten product life cycle.
Power ground
Must connect the power cord to the grounded outlet.
If not, it may cause electrical shock, damage or malfunction of product.
Recommendations on installing a NVR in a rack.
1. Don’t seal the inside of rack where NVR is installed.
2. Keep airflow through inlet and outlet.
3. If there is another device installed in the rack, secure additional space or install air ventilation.
4. Installation of an air circulation fan around each inlet and outlet is strongly recommended.
(Install filter around inlet or outlet for harmful substances)
5. Keep ambient temperature between 5°C~45°C around NVR.
6. Please connect the ground of NVR and ground of rack.
Warnings if HDD is installed
1. Please be extra careful not to damage HDD as it easily breaks.
2. During installation, make sure insulated coat doesn’t come off or isn’t placed in the worng place.
3. Don’t lose screws and parts.
(If screws an parts are not screwed or assembled correctly, product may not operate)
4.
Check HDD compatibility list HDD
(Please check with CS team of manufacturer.)
5. Partition table must be removed for HDDs used in PC or other NVR models before installation.
Adding HDD
Remove the power cord before installation to protect NVR against possible damage and an electric shock.
Please call the store you purchased the product from if it isn’t operating correctly due to installation or
configuration mistakes.

Warnings regarding Data loss
Please handle with care so HDD data isn’t damaged.
Check HDD compatibility before installing additional HDD.
Be careful not to give any shock on HDD during operation which could lead to possible damage or malfunction
.

Cases when HDD and its data can be damaged.
To minimize the data loss, please copy data as often as you can.
Physical shock during disassembly or installation may lead to Data damage.
Sudden power outage or turn off of NVR can damage HDD.
Please don’t try to move or shock NVR while HDD is working.