5.5
Crushing (combi tools)
Pipes and other hollow profiles are crushed by closing the spreader arms.
With combi devices, however, crushing is only to be performed in the tip area.
ATTENTION !
Material to be crushed can suddenly jump away.
Do not remain in the work area of the spreading and combi devices!
5.6
Lifting (combi tools)
The combi device can also be used for lifting vehicles or other movable loads.
Care must be taken to secure the load against slipping away and to position the spreader tips far
enough apart under the load to prevent slipping.
The load being lifted must be constantly monitored (tipping, rolling away or changing position).
Also, the lifted load must immediately be propped up and supported in a suitable way.
